Bermuda 40-1 (Hinckley) vs Owens Cutter

Compare up to 4 boats side by side.

On the numbers

Next to the Bermuda 40-1 (Hinckley), the Owens Cutter is 0.1 m shorter and 3% heavier. The Owens Cutter has the higher SA/D (14.7, under-canvassed), the Bermuda 40-1 (Hinckley) the lower (14.6, under-canvassed). The Owens Cutter has the higher D/L (397, very heavy), the Bermuda 40-1 (Hinckley) the lower (394, very heavy). The Owens Cutter has the higher Comfort ratio (41.4, heavy offshore), the Bermuda 40-1 (Hinckley) the lower (34.8, moderate ocean). The Bermuda 40-1 (Hinckley) has the higher Capsize screening (1.76, meets the common offshore guideline), the Owens Cutter the lower (1.56, meets the common offshore guideline).

Bermuda 40-1 (Hinckley) Bermuda 40-1 (Hinckley) Owens Cutter Owens Cutter
General
Builder Henry R. Hinckley & Co. The Owens Co./Henry R. Hinckley
Designer William Tripp Jr. Norman G. Owens
Hull type Keel/Cbrd. Long Keel
Rigging Masthead Yawl Cutter
Construction FG Wood
First built 1959 1944
Last built 1991 1955
Number built 203 ▲ 50 ▼
Dimensions
Length overall 12.42 m ▲ 12.34 m ▼
Waterline length 8.48 m ▼ 8.53 m ▲
Beam 3.58 m ▲ 3.20 m ▼
Draft (max) 2.62 m ▲ 1.78 m ▼
Draft (min) 1.31 m –
Weight & ballast
Displacement 8,618 kg ▼ 8,845 kg ▲
Ballast 2,948 kg ▲ 2,722 kg ▼
Ballast type Lead Lead
Sail plan
Sail area 60.24 m² ▼ 61.46 m² ▲
Mainsail 29.24 m² ▼ 30.80 m² ▲
Foresail 31.00 m² ▲ 30.66 m² ▼
Engine & tanks
Engine make Westerbeke –
Engine power 40 HP –
Ratios
SA/D 14.6 ▼ under-canvassed 14.7 ▲ under-canvassed
D/L 394 ▼ very heavy 397 ▲ very heavy
Ballast/Disp 34.2% ▲ low 30.8% ▼ low
Comfort ratio 34.8 ▼ moderate ocean 41.4 ▲ heavy offshore
Capsize screening 1.76 ▲ meets the common offshore guideline 1.56 ▼ meets the common offshore guideline
S-number 1.0 ▲ 1.0 ▼
Hull speed 7.07 kn ▼ 7.09 kn ▲

▲ highest and ▼ lowest value in each row. Ratio bands as on the yacht pages; – means the value is not in the catalogue.